Working Principle Of Air Source Treatment Unit

In the pneumatic transmission system, the Air Source Treatment Unit refers to an air filter, a pressure reducing valve, and an oil mister. The abbreviation F.R.L. Because the air pressure of the air source is often higher than the actual pressure required by each device, and the pressure fluctuation value is relatively large, a pressure reducing valve is required to reduce the pressure to the pressure required by each device.

Its working principle is that, after the compressed air enters the filter from the input port, due to the guidance of the cyclone blades, a strong rotation occurs inside. Under the action of the centrifugal force, large particles of solid impurities, liquid water droplets and oil droplets mixed in the air They are thrown onto the inner surface of the filter housing, settle to the bottom along the wall under gravity, and are discharged by manual or automatic drain. The gas passes through the filter element 5 to further remove the solid particles therein, and clean air is output from the output port. The baffle prevents the vortex of the air flow from rolling up the deposited sewage, causing secondary pollution.

We hot selling Pneumatic Cylinder and Air Cylinder Kits, welcome to contact us.